Configuring SSL/TLS

This article addresses the configuration steps for SSL/TLS within Chronicall when Chronicall version 4.0 is in use.

  1. Open Chronicall and navigate to the Chronicall System Settings found under the Admin (System) section on the Chronicall main page. Select "System Settings".
  2. Select "Basic Settings"
  3. Select the ellipsis (...) to the right of "SSL Proxy Configuration".

A configuration window will now appear.

516
  1. Set the "SSL Proxy Enabled" as "True"
  2. Enter the Chronicall Server IP Address in the "Server IP" section
515
  1. Copy the unique "DNS Record" and paste somewhere for future use.
516
  1. Select "OK", then "Save".
  2. Restart the Chronicall services

Note: At this point, the server will need to create a new nginx task in the Task Manager. This may take up to 5 minutes.

You can monitor the Chronicall folder for the new nginx folder to be created

To access the Chronicall folder navigate to the following:

  • Windows
    • C:\Program Files (x86)\Xima Software\Chronicall
      or
    • C:\Program Files\Chronicall
  • Linux
    • /var/lib/Chronicall
  1. Once the nginx task is available, take the DNS Record what was copied earlier and paste it in the address bar of either Google Chrome or Internet Explorer

Note: If using Chrome, add '/web' to the end of the DNS Record URL
Example: vvjfymky5wtbdrevqbv.acr.ximasoftware.com/web

  1. This will now present the new SSL enabled Chronicall.